REQUIREMENTS FOR A BACHELOR OF SCIENCE DEGREE WITH A MAJOR IN ENGINEERING:
Liberal Arts Core - Credits: 34
See Liberal Arts Core for course choices
| First-Year Launch Course |
FLC |
FLC 100 (Credits: 1) |
| |
|
|
| Communication |
CO1/CO2 |
COMP 150 p and any one approved |
| |
or |
CO2p course (Credits: 6) |
| |
CO2/CO3 |
Any one approved CO2p course and any one approved |
| |
|
CO3p course (Credits: 6) |
| |
|
|
| Mathematics |
MA1 |
MATH 221 (Credits: 4) |
| |
|
|
| Arts & Humanities |
AH |
Any one approved AH course (Credits: 3) |
| |
|
|
| Arts & Humanities |
AH |
One additional approved AH course (Credits: 3) |
| |
|
|
| History |
HI |
Any one approved HI course(Credits: 3) |
| |
|
|
| Social & Behavioral Sciences |
SS |
Any one approved SS course(Credits: 3) |
| |
|
|
| AH/HI/SSb |
AH or HI or SS |
One additional approved AHb or HIb or SSb course (Credits: 3) |
| |
|
|
| Natural & Physical Sciences |
SC1 |
CHEM 150 c,p (Credits: 4) |
| |
SC1 or SC2 |
PHYS 217 c,p (Credits: 4) |
Major Requirements: Credits: 92
Core Courses:
- ENGR 103 - Engineering Fundamentals I Credits: 3 g,p
- ENGR 104 - Engineering Fundamentals II Credits: 3 g,p
- ENGR 201 - Electric Circuits I Credits: 4 g,p
- ENGR 215 - Engineering Fundamentals III Credits: 3 g,p
- ENGR 217 - Statics Credits: 3 g,p
- ENGR 221 - Dynamics Credits: 3 g,p
- ENGR 270 - Engineering Thermodynamics Credits: 3 g,p
- ENGR 271 - Measurements and Instrumentation Credits: 1 g,p
- ENGR 315 - Engineering Design and Practice Credits: 3 g,p
- ENGR 317 - Mechanics of Materials Credits: 3 g,p
- ENGR 318 - Materials Science Credits: 3 g,p
- ENGR 319 - Materials/Mechanics Laboratory Credits: 1 g,p
- ENGR 321 - Fluid Mechanics Credits: 3 g,p
- ENGR 336 - Systems and Control Credits: 3 g,p
- ENGR 407 - Thermal and Fluids Systems Lab Credits: 1 g,p
- ENGR 496 - Senior Seminar Design I Credits: 3 g,p
- ENGR 497 - Senior Seminar - Design II Credits: 3 g,p
- Completion of the Fundamentals of Engineering National Exam (FE)
Major Electives:
You may complete the elective course requirements for this major in one of two ways:
1) Complete the Departmental Electives section shown below.
2) Complete the requirements of an area of Concentration (Applied Physics, Biomechanical, Computer/Digital Systems, Energy, Environmental, Global Engineering, Infrastructure, Nanotechnology and Materials Science, Recreational Equipment Design, Remote Sensing, Robotics, Structures and Mechanics.) If you complete a concentration, the concentration will be noted on transcript. Departmental Electives:
Complete a minimum of eighteen (18) credits from the list below. A maximum of two courses from the following list can be taken from outside the department (CE, ENGR, PHYS):
Other Electives:
A maximum of two courses from the following list can be taken from outside the department (CE, ENGR, PHYS):
Applied Physics Concentration:
Applied Physics Elective Courses:
Complete four (4) courses from the list below: Additional Departmental Elective Courses:
- Complete additional electives from the Departmental Electives list to reach a minimum of eighteen (18) elective credits.
Biomechanical Concentration:
Biomechanical Elective Courses:
Complete four (4) courses from the list below with at least two courses from the ENGR, CE and PHYS curriculum: Additional Departmental Elective Courses:
- Complete additional electives from the Departmental Electives list to reach a minimum of eighteen (18) elective credits. If you have completed the maximum two courses from outside the department (CE, ENGR, PHYS) on the requirement above then all additional electives must be from ENGR, CE, and PHYS curriculum.
Computer/Digital Systems Concentration:
Computer/Digital Systems Elective Courses:
Complete four (4) courses from the list below: Additional Departmental Elective Courses:
- Complete additional electives from the Departmental Electives list to reach a minimum of eighteen (18) elective credits.
Energy Elective Courses:
Complete four (4) courses from the list below with at least two from the ENGR, CE or PHYS curriculum: Additional Departmental Elective Courses:
- Complete additional electives from the Departmental Electives list to reach a minimum of eighteen (18) elective credits. If you have completed the maximum two courses from outside the department (CE, ENGR, PHYS) on the requirement above then all additional electives must be from ENGR, CE, and PHYS curriculum.
Environmental Concentration:
Environmental Elective Courses:
Complete four (4) courses from the list below with at least two from the ENGR, CE or PHYS curriculum: Additional Departmental Elective Courses:
- Complete additional electives from the Departmental Electives list to reach a minimum of eighteen (18) elective credits. If you have completed the maximum two courses from outside the department (CE, ENGR, PHYS) on the requirement above then all additional electives must be from ENGR, CE, and PHYS curriculum.
Global Engineering Concentration:
Global Engineering Elective Courses:
Complete four (4) courses from the list below with at least two from the ENGR, CE or PHYS curriculum: Additional Departmental Elective Courses:
- Complete additional electives from the Departmental Electives list to reach a minimum of eighteen (18) elective credits. If you have completed the maximum two courses from outside the department (CE, ENGR, PHYS) on the requirement above then all additional electives must be from ENGR, CE, and PHYS curriculum.
Infrastructure Concentration:
Infrastructure Elective Courses:
Complete four (4) courses from the list below with at least two from the ENGR, CE or PHYS curriculum: Additional Departmental Elective Courses:
- Complete additional electives from the Departmental Electives list to reach a minimum of eighteen (18) elective credits. If you have completed the maximum two courses from outside the department (CE, ENGR, PHYS) on the requirement above then all additional electives must be from ENGR, CE, and PHYS curriculum.
Nanotechnology and Materials Science Concentration:
Nanotechnology and Materials Science Elective Courses:
Complete four (4) courses from the list below with at least two from the ENGR, CE or PHYS curriculum: Additional Departmental Elective Courses:
- Complete additional electives from the Departmental Electives list to reach a minimum of eighteen (18) elective credits.
Recreational Equipment Design Concentration:
Recreational Equipment Design Elective Courses:
Complete four (4) courses from the list below with at least two from the ENGR, CE or PHYS curriculum: Additional Departmental Elective Courses:
- Complete additional electives from the Departmental Electives list to reach a minimum of eighteen (18) elective credits. If you have completed the maximum two courses from outside the department (CE, ENGR, PHYS) on the requirement above then all additional electives must be from ENGR, CE, and PHYS curriculum.
Remote Sensing Concentration:
Remote Sensing Elective Courses:
Complete four (4) courses from the list below with at least two from the ENGR, CE or PHYS curriculum: Additional Departmental Elective Courses:
- Complete additional electives from the Departmental Electives list to reach a minimum of eighteen (18) elective credits. If you have completed GEOG 310 on the requirement above then at least one additional elective must be from ENGR, CE, and PHYS curriculum.
Robotics Elective Courses:
Complete four (4) courses from the list below with at least two from the ENGR, CE or PHYS curriculum: Additional Departmental Elective Courses:
Complete additional electives from the Departmental Electives list to reach a minimum of eighteen (18) elective credits. Structure and Mechanics Concentration:
Structure and Mechanics Elective Courses:
Complete four (4) courses from the list below with at least two from the ENGR, CE or PHYS curriculum: Additional Departmental Elective Courses:
- Complete additional electives from the Departmental Electives list to reach a minimum of eighteen (18) elective credits. If you have completed the maximum two courses from outside the department (CE, ENGR, PHYS) on the requirement above then all additional electives must be from ENGR, CE, and PHYS curriculum.
Auxiliary Courses:
- CHEM 150 - Fundamentals of Chemistry I: Atoms/Molecules Credits: 4 d,g,p
- MATH 221 - Calculus I Credits: 4 g,p
- MATH 222 - Calculus II Credits: 4 g,p
- MATH 223 - Calculus III Credits: 4 g,p
- MATH 319 - Engineering Statistics Credits: 3 g,p
- MATH 327 - Differential Equations Credits: 3 g,p
- PHIL 341 - Professional Ethics Credits: 3 g
- PHYS 217 - Physics - Science and Engineering I Credits: 4 d,g,p
- PHYS 218 - Physics - Science and Engineering II Credits: 4 g,p
- PHYS 333 - Computational Methods Credits: 3 g,p
Complete one (1) course from the following:
Free Electives - Credits: Variable
TOTAL REQUIRED FOR GRADUATION - CREDITS: 126
b A minimum of 15 credits of coursework must be completed in the combined areas of AH/HI/SS.
c This Liberal Arts Core course is required by the major. To complete the degree in the specified total credits for graduation, students must use this course to fulfill the requirements of both the Liberal Arts Core and the major.
d This course fulfills both a Major requirement and a Liberal Arts Core requirement. Credits for this course are counted in the Liberal Arts Core section of the curriculum listing. These credits are not counted in the Major Requirements total.
g A grade of C- or better will be accepted for the major.
p This course has a prerequisite. You must complete the prerequisite course(s) before enrolling in this course. Sometimes you are given a choice or a list of prerequisites to complete.
Note: Among the total credits required for graduation, at least 36 credits must be upper division (300- and 400-level) courses.
Note: Students completing the Liberal Arts Core in fewer than 34 credits will have additional free electives.
Note: Students who have met a prerequisite or required course through transfer, examinations, or assessment of prior learning will have additional free electives.
|